Drying Solution Catagories
- Sand Drying Solution
- Sawdust Drying Solution
- Sludge Processing Solution
- Poultry Dung Drying Solution
- Animal Feed Drying Solution
- Dry Mixed Mortar Drying Solution
- Multi-function Small Dryer Solution
- Coal Products Drying Solution
- Screw Conveyors
- Heating Equipment & Others
- Dust Removing Equipment
- Belt Conveyors
- Bucket Elevators
Latest News
Latest Products
Small Electricity Heating Sand Dryer
General introduction of the small electricity heating sand dryer:
The small electricity heating sand dryer, is a small sand dryer which produces 0.5 t/h, 1 t/h, and 2 t/h capacities, suitable for small factories.It is heated by electric heating pipe, covered over the outer drum of the dryer.
Features of the small electricity heating sand dryer:
1. Advanced drying technology - high temperature and fast drying technology, multi-ring drum sleeve new structure, high drying intensity.
The material stays in the dryer for a long time, which greatly increases the output of the single drum dryer with the same volume.
2. High degree of Automation - using advanced fuzzy control system to realize automatic control of product quality.
3. Low cost of drying - using high efficiency hot blast stove, high temperature and fast drying process, multi-ring drum sleeve new structure,
The comprehensive thermal efficiency is increased by 20-45 percentage points, which greatly reduces the drying cost. At room temperature of 20 degrees,
Dry 1 ton of sand, less than 8 kg of coal.
4. Long service life - due to the use of clean hot air and sand contact drying, rather than directly heating the cylinder with fire.
It avoids the deformation and burning loss of the cylinder, avoids the possibility of secondary pollution and the slow speed of the cylinder.
Therefore, the service life is longer.
Technical speicification of the small electricity heating sand dryer:
model | motor power | heating power | capacity | machine size |
WS0.5 | 1.5 kw | 40 kw | 0.5 t/h | 2.5*0.8*1.1 m |
ws1.0 | 1.5 kw | 40 kw | 1.0 t/h | 2.7*0.8*1.3 m |
ws2.0 | 3 | 80 kw | 2.0 t/h | 3.1*1.2*1.6 m |