Drying Solution Catagories
- Sand Drying Solution
- Sawdust Drying Solution
- Sludge Processing Solution
- Poultry Dung Drying Solution
- Animal Feed Drying Solution
- Dry Mixed Mortar Drying Solution
- Multi-function Small Dryer Solution
- Coal Products Drying Solution
- Screw Conveyors
- Heating Equipment & Others
- Dust Removing Equipment
- Belt Conveyors
- Bucket Elevators
Latest News
Latest Products
Duck Manure Dehydrator
Category: Poultry Dung Drying Solution
Publish Time: 2022-09-01 10:35
The submerged pump lifts the raw fecal liquid to the duck fecal dehydrator, and the extrusion auger will gradually push the duck fecal liquid to the front of the body, while constantly increasing the pressure of the front edge, forcing the water in the material to extrude out of the mesh screen and flow out of the drainage pipe under the action of the edge pressure belt filter.
Duck Manure Dehydrator
Introduction of duck manure dehydrator:
The duck manure dehydrator is widely used in livestock and poultry farms of livestock and poultry excrement (chicken manure, duck manure, pig dung, etc.) of solid-liquid separation dehydration processing, the solid liquid separator is mainly composed of: stainless steel mesh, stainless steel spiral twisted dragon, stainless steel spiral blade adopts high quality 304 stainless steel manufactured through special process, have the characteristics of corrosion resistant and so on. Now I work the screw extrusion type continuous solid-liquid separation processor, using 0.5 mm, 0.75 mm and 1.0 mm and so on the aperture of mesh filter.
Working principle of duck manure dehydrator:
The submerged pump lifts the raw fecal liquid to the duck fecal dehydrator, and the extrusion auger will gradually push the duck fecal liquid to the front of the body, while constantly increasing the pressure of the front edge, forcing the water in the material to extrude out of the mesh screen and flow out of the drainage pipe under the action of the edge pressure belt filter. The work of the fecal dehydrator is continuous. Its materials are continuously lifted into the body, and the pressure at the leading edge is constantly increased. When it is large enough, the discharge port is pushed open and the extrusion port is extruded to achieve the purpose of extrusion. If too much fecal water is pumped in, it will also be discharged to the original fecal tank through the overflow pipe, which also plays the role of stirring. The waste water separated by spiral extrusion filtration can be directly sent to the sedimentation tank. In order to master the discharging speed and water content, the counterweight under the main machine can be adjusted to achieve a satisfactory and appropriate water content.
Features of duck manure dehydrator:
The duck manure dehydrator has small volume, low speed, simple operation, convenient installation, maintenance and cost province, high efficiency, investment recovery fast, do not need to add any flocculant and other characteristics; The processor USES the high strength screw axis, decay resistance alloy spiral vane, screen mesh for the production of high quality stainless steel, spiral dragon blades made of a special process is two to three times the service life of the other similar products.
Advantages and effects of the duck manure dehydrator:
1. The dried duck manure dehydrated and separated by the duck dung dehydrator is almost odorless and has small viscosity. It can be directly used as fertilizer or as cattle mattress material.
2. The dried duck manure dehydrated and separated by the duck dung dehydrator can be mixed with grass bran, fully stirred, added with bacteria for fermentation, and granulated to make compound organic fertilizer.
3. At the same time, it can be made into pellet feed, which is a good feed for fish.
Technical specification of duck manure dehydrator:
Name |
Specification |
Model |
TS-4, TS-5.5, TS-7.5 |
Main machine motor power |
4kw, 5.5kw, 7.5kw |
Pump motor power |
4kw |
Mainframe construction material |
Stainless steel |
Input flow amount |
5-8, 10-16, 15-25 |
Washing water consumption |
0.2m3 |
Washing frequency interval |
20days |
Max input solid content |
35% |
Max output moisture |
40-60% |
Filting net hole size |
0.3/0.6/1.0 |