Drying Solution Catagories
- Sand Drying Solution
- Sawdust Drying Solution
- Sludge Processing Solution
- Poultry Dung Drying Solution
- Animal Feed Drying Solution
- Dry Mixed Mortar Drying Solution
- Multi-function Small Dryer Solution
- Coal Products Drying Solution
- Screw Conveyors
- Heating Equipment & Others
- Dust Removing Equipment
- Belt Conveyors
- Bucket Elevators
Latest News
Latest Products
Faults and solution of pomace dryer
Henan Dingli experts explain for everybody below pomace dryers daily production is one of the most common failures and solutions. Hope you seriously study.
Pomace dryers in daily production will inevitably have a little trouble, what is the reason that these failures caused by? According to the new xin heavy engineering and technical personnel visiting survey, found the cause of pomace dryers fault roughly divided into three points: first, pomace dryers maintenance work does not reach the designated position; Second, pomace dryer parts don't change in time; Third, pomace dryer improper operation; Fourth, pomace dryer installed improperly. These cause pomace dryers fault factor is completely avoided. So, this requires pomace dryer operators and a mechanic to do the work, so as to reduce the failure rate of pomace dryer by zero, avoid cause greater economic losses for the boss.
Henan Dingli experts explain for everybody below pomace dryers daily production is one of the most common failures and solutions. Hope you seriously study.
1, pomace dryer in the process of using or use time is too long, may be the belt loose, fall off or broken. Aiming at this problem, the solution is simple, is to always check whether the switch contact is good, is there a blow a fuse, the position of the motor is correct, and often have to do is change the belt;
2, pomace dryers can suddenly become noisy when using. Solve the problem of the noise is big, want to consider from multiple aspects, such as whether the place is not balance, if they put evenly; When installation is not installed, if it is a long reinstall; Bearing is the loss of oil or damaged, thus changes the bearing; Bearing fixed bolt is loose, if long verify strengthening, etc.;
3, pomace dryer often brake failure, it is probably because the brake skin caused by excessive wear, so to solve this problem, only need to replace the brake;
4, pomace dryer equipment of raw materials on fire, it was probably caused by improper operation, so suggest user before use, must be familiar with the dryer using the operating instructions, operating in accordance with the requirements, of course, does not rule out is the dryer design itself has a problem, if is the problem that the dryer itself, will actively negotiate with factory, for replacement or modification dryer;
5, pomace material suction within the dryer equipment does not walk, there are questions, this is likely to be installed air leakage, etc., to solve this problem is to determine the reason, according to reason correctly.
Prev article:Pomace dryer turns waste into treasure Next article:The necessity of eat hutch waste disposal |