Drying Solution Catagories
- Sand Drying Solution
- Sawdust Drying Solution
- Sludge Processing Solution
- Poultry Dung Drying Solution
- Animal Feed Drying Solution
- Dry Mixed Mortar Drying Solution
- Multi-function Small Dryer Solution
- Coal Products Drying Solution
- Screw Conveyors
- Heating Equipment & Others
- Dust Removing Equipment
- Belt Conveyors
- Bucket Elevators
Latest News
Latest Products
How to solve the oil leakage of dryer during operation
Dryer in the process of application, if there is a problem of oil leakage, we have to deal with it in time. Generally, this situation is due to the long running time and large processing capacity when we deal with materials, so it will cause a series of problems, thus affecting the normal use of the equipment. Oil leakage is a common type of dryer operation and problems. So, how to avoid and solve this problem?
(1) During operation, due to not cleaning in time, it is easy to cause some oil holes on the oil pipe to be blocked by the residue of the material, resulting in the increase of oil pressure inside the oil pipe and the increase of oil injection amount of the oil ring, which is easy to splash outside the equipment and cause oil leakage inside and outside the whole dryer. Therefore, in this case, it is necessary to clean the equipment in time and dredge the oil injection holes.
(2) When injecting oil, the injection valve increases and the injection volume is large. Generally, the oil will fall from the injection hole to some shafts inside the equipment. At the same time, the operation of the equipment will lead to oil splashing, resulting in the drying quality and operation difficulty of the equipment. In view of this situation, it is necessary for technicians to fine tune the oil injection link of the equipment, and ensure that under the premise of normal oil injection and lubrication of the equipment, it will not lead to the influence of oil shortage and oil temperature on the equipment. There are also some factors because when lubricating the dryer, the oil is thrown out of the oil leakage ring, which leads to the oil leakage of the whole equipment. In order to prevent this kind of situation, the dryer sets a rubber plate between the oil ring and the oil hole, which completely insulates the oil event from splashing. Through the replacement of parts of the whole equipment, the overall area of the injection hole can be increased, which can ensure the lubrication of the oil shaft and will not cause the blockage and oil leakage of the equipment.
No matter what kind of problem the dryer is dealing with, we need to find out the corresponding countermeasures in time, so as to grasp the later use effect as much as possible, so I hope you still have to do some maintenance.
Prev article:Why Is There Internal Combustion Of The Rotary Dryer? Next article:How to install three drum dryer? |