Drying Solution Catagories
- Sand Drying Solution
- Sawdust Drying Solution
- Sludge Processing Solution
- Poultry Dung Drying Solution
- Animal Feed Drying Solution
- Dry Mixed Mortar Drying Solution
- Multi-function Small Dryer Solution
- Coal Products Drying Solution
- Screw Conveyors
- Heating Equipment & Others
- Dust Removing Equipment
- Belt Conveyors
- Bucket Elevators
Latest News
Latest Products
When we make less detours in the production process, we can effectively improve the power. Following are some of the problems that should be prevented in the operation process of the poultry manure dryer operator.
1. In the operation of the poultry manure dryer, the wind speed in the drum should be well controlled. If the wind speed is too low, the dynamic and static force between the material and the hot air will be relaxed, and the drying power will be reduced.
2. It should be prevented that the material does not move back and forth in the cylinder of the slime dryer, so that the material is quickly pumped away by the wind, so that the storage capacity of the material in the cylinder is too low, and the dynamic and static exchange area between the material and the hot air is reduced.
3. In order to improve the output value of the dryer, the length of the drum can not be lengthened. Because the diameter is too large, it can not be fully used, resulting in the loss of heat energy, and also adding equipment area.
4. When installing the main engine of the poultry manure dryer, do not choose the skew method of high fire inlet and low fire inlet. This method can only speed up the movement of materials to the far fire end, and reduce the storage capacity of materials in the drum. Thousands of lifting plates in the whole drum from early years to later are lifting materials together, but there are very few lifting materials, In addition, this kind of depiction also causes unnecessary trouble to the installation and work.
5. When the slime dryer is not used for operation, the downstream drying method can not be adopted. This drying method will make the full steam of slime in the drying process can not be swept in time, and the working interval in the drum is too long, so that the material can absorb water from the beginning.
6. It is necessary to master the temperature of the outlet and the inlet. If the outlet temperature is too high, the power will be wasted, and the quality of the dried materials will be reduced, which will make the color and color of the materials turn black and even the paste.
7. In order to limit the moving speed of the material towards the outlet, the rotation speed of the drum should not be limited very low, which greatly reduces the number of times that the material is lifted in the drum and the number of times of dynamic combat between the material and the hot air.
The equipment operator of the poultry manure dryer only needs to prevent the above seven operation errors in the production process, which can effectively promote the drying power of the poultry manure dryer and add higher revenue for the company.