Drying Solution Catagories
- Sand Drying Solution
- Sawdust Drying Solution
- Sludge Processing Solution
- Poultry Dung Drying Solution
- Animal Feed Drying Solution
- Dry Mixed Mortar Drying Solution
- Multi-function Small Dryer Solution
- Coal Products Drying Solution
- Screw Conveyors
- Heating Equipment & Others
- Dust Removing Equipment
- Belt Conveyors
- Bucket Elevators
Latest News
Latest Products
In order to make good use of the three return dryer, it is necessary to start from the correct operation of start and stop of the dryer, which can make the equipment start normally and run stably. So how to start and stop the three return dryer correctly?
Equipment start-up: three return dryer start-up, first need to prepare materials to be dried, early inspection work needs to be done well; Secondly, when starting up, it is necessary to start up the hot blast stove first, and after its stable combustion, start the blower, and then prepare for feeding, and the induced draft fan is later; Before the material conveyor starts to feed, it is necessary to start the three return dryer and start the cylinder.
Equipment shutdown: the three return dryer is about to end. Half an hour before the production, it is necessary to reduce the fuel addition of hot blast stove, gradually turn off the fire, and then turn off the blower and induced draft fan. Then stop the feeding of the equipment. When the drying of the materials in the three return dryer cylinder is completed and almost all the materials are discharged, stop the operation of the cylinder. Before the temperature is completely cooled, manually drive the equipment to avoid deformation.
Only when the dryer is started and stopped correctly, can the three return dryer dry materials normally and stably, reduce wear and tear, and produce efficiently.
Prev article:How Does Carbide Slag Dryer Work Next article:Four Effective Ways To Increase The Capacity Of Three Cylinder Dryer |