Drying Solution Catagories
- Sand Drying Solution
- Sawdust Drying Solution
- Sludge Processing Solution
- Poultry Dung Drying Solution
- Animal Feed Drying Solution
- Dry Mixed Mortar Drying Solution
- Multi-function Small Dryer Solution
- Coal Products Drying Solution
- Screw Conveyors
- Heating Equipment & Others
- Dust Removing Equipment
- Belt Conveyors
- Bucket Elevators
Latest News
Latest Products
The direct change brought by the three cylinder dryer is that it covers a small area, but has stronger production capacity. It is very helpful for enterprises to reduce the overall size of the three cylinder dryer, reduce the heat dissipation area of the cylinder and greatly improve the utilization rate of heat energy. Of course, for the three barrel dryer, what should be improved is its output. What is the way to improve the output of the three barrel dryer? Today, we will list four effective ways to increase the output of three barrel dryer
1. A hoist can be installed on the three drum dryer to increase the chance of contact between materials and high temperature hot gas, so that the lifting process can not be too frequent, otherwise small particle materials will be lost with the wind. Attention should be paid to control the working frequency of the hoist, so as to control the lifting speed of materials to be lifted, which not only improves the drying efficiency, but also makes the drying effect better.
2. In order to give full play to the efficiency of the three barrel dryer, the first thing is to ensure the particle size of the feed. After crushing and grinding, if the particle size of the material is not up to the standard, it will increase the difficulty of drying, and it is not easy to fully improve the bulk material in the lifting process, so as to speed up the feeding speed. Therefore, before feeding, the particle size must be small. Within the range of particle size requirements, the particle size should be reduced as much as possible, and the particle size should be uniform.
3. Before entering the three cylinder dryer, the moisture content must be strictly controlled. In the case of strict control of moisture, the water that should be filtered can not be poured into the three drum dryer, which wastes a lot of heat, not only delays the drying time of materials, but also seriously affects the production cost and reduces the economic benefits.
4. Increase flue gas temperature and convection velocity. When we went to school, if we wanted to evaporate water faster, we often used to raise the temperature. However, the temperature of flue gas must be operated within a certain range. Three drum dryer itself and materials have a certain high temperature type, must be firmly controlled, do not rush to dry and damage materials or three drum dryer.
Prev article:How to Start and Stop The Three Return Dryer? Next article:Two Main Factors Of Energy Efficiency Of Three Drum Dryer |