Drying Solution Catagories
- Sand Drying Solution
- Sawdust Drying Solution
- Sludge Processing Solution
- Poultry Dung Drying Solution
- Animal Feed Drying Solution
- Dry Mixed Mortar Drying Solution
- Multi-function Small Dryer Solution
- Coal Products Drying Solution
- Screw Conveyors
- Heating Equipment & Others
- Dust Removing Equipment
- Belt Conveyors
- Bucket Elevators
Latest News
Latest Products
Mini Sand Dryer
Category: Sand Drying Solution
Publish Time: 2017-12-11 11:38
Mini Sand Dryer
General introduction of mini sand dryer:
The mini sand dryer has in
Mini Sand Dryer
General introduction of mini sand dryer:
The mini sand dryer has included all the necessary equipment from A to Z, It is a complete production line, that is to say, the user has no need to buy any extra equipment. The mini sand dryer includes the hot air furnace, the blower, the dryer, the cyclone, the vibratiung screen, etc. Since it's compact type, it has the advantages of saving space, saving cost, saving manpower, easy transportation, etc.
The mini sand dryer is three cylinder dryer, which is used to dry wet particle materials: yellow sand be used in the mortar powder industry, sandstone of all specifications used in casting industry blast furnace slag which is used in cement industry, etc. The particle size is small. The moisture content is 1-0.5% or less after drying process. Three Cylinder Dryer is widely used in mine, building materials, chemical, metallurgy, cast industries and so on. It can dry the material such as sand, slag, clay, fly ash, coal, iron powder, quartz sand, and ore and so on.
Working Principle of mini sand dryer:
Materials enter the inner side of the drum through the feeding device to realize current flow drying process. They get raised and scattered under the shoveling plate in a spiral advancing way to exchange heat. Then the materials enter the middle layer of the inner wall through the other end to realize counter current drying process. They are lifted in over and over in the middle layer which advance in two-steps forward and one-step back way. They absorb heat from both inner drum and middle drum, which extend the drying time and realize the best drying condition. Finally, materials fall into the external layer of the drum from the other end of the middle layer, processing in a rectangle multi-loop way. The dried materials move quickly out of the drum under the hot air, while the wet ones remain because of their own weight. Materials are dried completely inside the rectangle shoveling plate and then cooled by the single drum cooler, thus finishing the whole drying process.
Features of mini sand dryer:
1. The cost can be reduced to 15%.
2. The final moisture of the materials is ensured to be below 0.5%, making it the first choice of dry-mixed mortar and slag powder production line.
3. The self-heat-preservation function makes heat efficiency of the cylinder can reach as high as 70%, thus improving the heat efficiency by 35%.
4. The fuel can be coal, gas and oil, and it can be used for drying lump, granulous and powdery materials whose granularity is below 20mm.
5. Compared with monocular dryer machine, its floor space is reduced by about 50%, infrastructure investment reduced by about 50% and electricity consumption reduced by 60%.
6. The needed final water content index can be easily regulated according to customers’ requirement.
7. The temperature of the air out is low and the service life of the dust removing equipment is long.
8. It doesn't need rack wheel and pinion driving, but uses riding wheel for transmission.
Technical specification of mini sand dryer:
Model
|
Capacity (m3/h)
|
Moisture after drying (%)
|
Coal consumption (kg/ton of sand)
|
Main motor power (kw)
|
DLS623
|
3m3/h
|
<0.5%
|
7
|
3
|
DLS625
|
5m3/h
|
<0.5%
|
7
|
5.5
|